APEX 10® - Automated Bundle
Keep Adding and Keep Saving with this Incredible Automated Bundle!
Everything you need for automated reloading - this package includes all the press accessories needed to have you loading at top speed:
- Apex 10 Press with unparalleled Mark 7® Autodrive
- Press comes equipped with Mechanical Powder Measure and Mark 7® 11" High Speed Case Feeder
- Mr. Bullet Feeder
- SAVE $75 for every Apex 10 sensor added to your cart along with this bundle. (Discounted price will be applied when items are added to cart)
Eligible sensors include:
Click here to check out some of the Apex 10's main features in action
All in One Stroke
A robust 10-station CNC Aluminum tool head which allows you to “Do It All”
Station 1: Case feeding
Station 2: Sizing and decapping
Station 3: Swage/Case trim
Station 4: Primer seat
Station 5: Case flare/neck expansion
Station 6: Powder drop
Station 7: Powder check
Station 8: Bullet Dropper
Station 9: Seating
Station 10: Crimping
*The above is just one possible set-up. The 10 station tool head offers a large variety of options for all your reloading and case processing needs.
Upgradeability
Along with the included contents, the APEX 10 Automated Bundle can easily be further upgraded with the following options:
- Primer Xpress – Electronic Oscillating Primer System
- Digital Powder Measure (only with Autodrive)
- Machine caliber conversion kits that include everything required
to convert the press from one caliber to another - Trimmer kit for rifle processing
Specs and Dimensions
- Dimensions: 36” Tall, 15” Wide, 11” Deep
- Number of Stations: 10
- Caliber Range: 380 up to .308
- Drive System: Manual
- Priming System: Shuttle Disk Stacked Priming System
- Case Feeder: 11” High Speed Case Feeder
- Powder Measure: Mechanical Powder Measure
- Machine Weight: ~70 lbs
Mark 7 APEX 10 Bundle Package Includes:
- 11” Case Feeder with variable speed motor
- Mechanical Powder Measure
- 10-station Billet CNC Aluminum tool head
- Shuttle Disk Stacked Priming System
- Small and Large Primer & Swaging Components included
- Lyman Stainless Steel Pro Hold-Down Die
- Double Guide Rod support for the tool head for more stability
- The Apex 10® Autodrive™
- Mr. Bullet Feeder Gen 2
PLEASE NOTE: Hold Down Die is included for Swage operation.
Why 10 Station's?
A common question we receive at Mark 7 Reloading is, "Why do our presses feature 10 stations?" While this may seem straightforward to seasoned reloaders familiar with 7-station presses, it’s not immediately clear to those newer to reloading or progressive systems. The key advantage of a 10-Station toolhead lies in its ability to separate specific die operations, allowing each station to perform a dedicated function for enhanced precision and efficiency. Below are some of the key benefits:
- Separation of Sizing and Decapping
By using a universal decapping die, the decapping pin can be removed from the sizing die and installed over the priming station. This setup not only allows the sizing die to have its own dedicated station, but also enhances the centering and hold-down of the case, leading to more consistent priming. - Separation of Flaring and Powder Drop
Separating these two functions improves both the quality and control of the case mouth flare. This configuration also ensures that the powder measure is solely responsible for dropping powder. Systems that combine flaring and powder dropping can cause brass to stick to the flare plug, which can dislodge when the toolhead lifts, potentially disrupting the powder measure and leading to inconsistent charges. Our powder measures are specifically designed to drop powder, and attempting to use them for flaring can damage the mechanism. - Dedicated Bullet Feeder, Powder Check, Seating, and Crimping Stations
With fewer stations, you may be forced to combine some of these critical functions, which compromises both time efficiency and the overall quality of the reloaded rounds. By dedicating a station to each of these functions, our system saves you valuable time and ensures greater precision, allowing for more effective and consistent reloading without the need to frequently switch dies. - Station Separation Produces Superior Results
Combining critical operations like some other die makers, such as seating and crimping, can result in subpar outcomes, such as bullet jacket damage, which affects both accuracy and consistency. Separating these functions maximizes the potential of each round, ensuring higher-quality ammunition. - Freedom of Customization
Although the 10-Station toolhead offers ample space for advanced setups, you don’t have to use all 10 stations if your current needs don’t require it. For example, if you’re primarily reloading basic pistol ammunition, you can use the 10-Station toolhead as you would any other. The additional stations, however, provide future-proof flexibility, allowing you to expand your reloading setup as your needs grow.
These are just a few of the many reasons why a 10-Station toolhead offers significant advantages for serious reloaders. If you're unsure where to begin, explore our recommended setups below. By clicking on the image of the toolhead or selecting the "Setup" button, you can take a closer look at each individual station and see how the system is designed to optimize your reloading process.
10 Station Toolhead Setup -
Full Loading
This is how you’d set up your tool head when fully loading ammunition.
Overview
10 Station Toolhead Setup -
Loading Primed Brass
This is how you’d set up your tool head on an Apex 10 if you're loading pre-primed brass.
Overview
10 Station Toolhead Setup -
Processing Pistol Brass
This is how you’d set up your tool head on an Apex 10 if you wanted to process pistol brass.
Overview
Station 6: Empty
Station 7: Empty
Station 8: Empty
Station 9: Empty
Station 10: Empty
Station 1: Case Feed
Station 2: Universal Decap Die
Station 3: Universal Hold Down Die
Station 4: Size Die
Station 5: Empty
Station 6: Empty
Station 7: Empty
Station 8: Empty
Station 9: Empty
Station 10: Empty
10 Station Offset Toolhead Setup -
Proccessing & Trimming Rifle Brass
This is how you’d set up your tool head on an Apex 10 if you wanted to process and/or trim rifle brass.
Overview
Station 6: Partial Trimming
Station 7: Empty
Station 8: Empty
Station 9: Trimming
Station 10: Empty
Station 1: Case Feed
Station 2: Universal Decap Die
Station 3: Universal Hold Down Die
Station 4: Size Die
Station 5: Empty
Station 6: Partial Trimming
Station 7: Empty
Station 8: Empty
Station 9: Trimming
Station 10: Empty
- The ease and time required to change calibers depends on both your primer size and level of experience. Small calibers can take as little as 30 minutes or less with all necessary accessories. Small to large caliber or large to small caliber changes could take up to an hour depending on the number of pieces changed.
- No special tools are needed, but a good Allen wrench set is recommended. It will take about an 1 hour to 90 minutes to get the press set up* meaning the press is physically set up but not ready to load on: that will take another 1 to 2 hours. The necessary step are:
- Install the sensors
- Set up and adjust the bullet feeder and case feeder
- Set dies
- Set the sensors
- Set powder measure charge, etc...
- In all, you should expect to spend approximately 90 minutes to set up a manual press, or approximately 3 or more hours for an automated press with sensors.
- The Rev is our flagship/workhorse press that comes standard with a larger 14” case feeder, Mr. Bullet feeder pro, digital powder measure, and commercial vibratory priming system.
- This is a direct drive unit that is extremely smooth in operation and designed to surpass that coveted million round mark.
- Very easy: Simply install your Apex 10® / Evolution™ Autodrive which typically requires 30 - 45 minutes on average.
- This is a “loaded question” (pun intended). This will depend heavily on the cost of your components you purchase.
- We tend to look at this as more of an opportunity to load ammunition to your own specifications and tailor to your paricular guns.
- Your monthly ammo bill is actually likely to increase, not because you are paying more per round, but you will simply be shooting more
- Our presses are 10 station, and designed around, and for automation. Almost by default, this makes them more robust in operation and have much tighter tolerances.
- With 10 stations, we can separate all aspects of reloading to create a better finished round of ammunition, while still adding sensors and bullet drop stations. No more combining seating/crimping dies, powder drop with case flaring, or sizing with decapping.
- Absolutely. All standard 7/8"-14 thread dies will work in our presses as long as they do not need contact with the shell plate for proper operation.
- We would recommend a manual press for anyone who is newer to reloading, or unfamiliar with progressive presses. There is a lot happening all at once with automation and can be a lot for the operator to handle without the basic knowledge of press operation. Automation is a great step up for loaders down the road once they are familiar with the process.
- Automation can, and will add a level of consistency to the operators output. The motor will operate the press in the same manner and speed for every stroke. This can have a positive effect on powder drop, priming and bullet seating/crimping. This will also give a higher sustained output.
- The Apex 10 comes with both small and large priming system components. No conversion parts needed there.
- Caliber specific dies
- Spare tool head and stand (optional but highly recommended for faster caliber changes.)
- Extra powder measure (optional but highly recommended for faster caliber changes)
- if not purchasing a whole P/M, then will need a P/M conversion kit if changing from pistol to rifle or vice versa.
- Bullet feeder conversion kit
- Case feeder conversion plate
- Press conversion kit (101-1068)
- Yes, as long as you are using your press with an autodrive
- Our digital sensors need an auto drive to function.
- We highly recommend our mechanical powder check sensor for use while loading on your Apex 10.
- Yes, when used with an Evolution™/ Apex 10® Autodrive.
| SKU | 101-1259 |
|---|---|
| Number of Die Stations | 10 |
| Caliber Range | .380 up to .308 |
| Drive System | Manual |
| Priming System | Shuttle Disk Stacked Priming System |
| Type of Case Feeder | 11" High Speed Case Feeder |
| Type of Powder Measure | Mechanical Powder Measure |
| Machine Weight | 60 lbs |
| Dimensions | 18" Tall, 15" Wide, 11" Deep |
The Evolution™ Commercial International
Previous
